The following installation information is to be used as
a guideline only. Please consult the relevant authorities
for rules and regulations regarding your wood burning sauna
installation:
1. Sauna heater should be installed on a non-combustible
surface; i.e. concrete pad.
2. Set heater in place then brick around the feed neck.
The brick should be at least 4’ wide by 4’
high.
3. The heater should be no closer than 18" to any
combustible surface.
4. Use a 6" stove pipe and squeeze to fit over outlet
at top of stove.
5. Install a damper in the stovepipe.
6. Use double insulated stovepipe where it passes through
the wall or ceiling.
|
