Barrels - Clear or Knotty Cedar

The barrel sauna concept is the ideal outdoor sauna. Simple, practical and beautiful. Your choice of either Knotty or Clear Western Red Cedar barrel saunas Barrel saunas have 1-1/2" thick walls for natural insulation and the barrel design gives you a much smaller heating area than a rectangular sauna, with plenty of room for bathers. Ideal by the pool or at the cottage. A healthy and enjoyable space that generations will enjoy.

• Barrel saunas are manufactured in the Canada.
• Constructed of solid 2x6 tongue and groove Clear Western Red Cedar "logs" with notch corners and threaded rod system for secure assembly.
• Benches are pre-assembled.
• Standard heater is Saaku Sauna CP model with control built into front base of heater. (Other heater options; including wood fired.)
• Sauna Door with Full Length, light bronze, single pane tempered window.

For More Barrel Sauna pictures, see "Barrel Saunas" in photo gallery"

** Bench style depicted is upgrade
** Flat floor boards are optional

Barrel Sauna Diagrams & Measurements

Diagrams (pdf) showing Barrel Measurements. Includes sizing for saunas and saunas with porch and changeroom. 
 

6' Diameter Barrels:

• 6 x 6 Barrel
• 6 x 7 Barrel
• 6 x 8 Barrel

7' Diameter Barrels:

• 7 x 6 Barrel
• 7 x 7 Barrel
• 7 x 8 Barrel

Selecting your Pre-Fab Sauna Heater (Wiring Considerations)

In general, heaters with built-in controls are simpler to install in pre-fab saunas. This is because the supply wire goes directly to the heater. You do not have to route the wire to a separate control. 
As a result the Saaku Sauna CP and Tylo Sense Sport are the obvious choices.

Having said that, you are not limited to a built-in control models.
Some prefer separate controls for the convenience or for the features that are only available with certain models
The Tylo Plus and Tylo Combi are avaialble with the Pure or Elite (wi-fi) control
The "steaming" Tylo Combi only comes with a separate control
When opting for an separate control model with a pre-fab sauna, the control is usually installed inside the sauna. We include extra trim to conceal the wire.
NOTE: When installing a Tylo control inside sauna, the control must be at least 12" away from the heater and no more than 36" above the floor.

All of our outdoor pre-fab saunas are also available with wood burning saunas heater.
The outside feed wood stove is manufactured specially for our saunas.
You may aslo select the inside feed Harvia M3 with glass door to view the fire
                

Outdoor pre-fab sauna can beinstalled on a variety of surfaces, including:  concrete pad, gravel "cottage" pad, patio or deck
Recommended base size and specifications: 

                           BASE PREP & SPECS for ALL OUTDOOR SAUNAS: 

                                 https://www.saunafin.com/uploads/upload/pdf/Sauna%20base%20%26%20pad%20specification%20%26%20dimensions.pdf

 CANADA:                  
Pick up is not available.
Local Delivery and Assembly available in Southern Ontario. (Delivery= approx. $200.  Delivery& Set Up=approx. $750)
Elsewhere, shipping via transport truck. (Call for rate)

 UNITED STATES: 
Freight will be confirmed before the the order is finalized.
The U.S. freight table below is an estimate based your part of the country.

Barrel Saunas packed as loose material in a crate.
Shipped via transport truck. Delivery is curbside (at the end of your driveway).
Lift gate delivery is included where available (for crate sizes up to 92").
If crate is too large for liftgate, you must open crate on truck and off load individual pieces.

Freight Table does not show in mobile format. Check via computer or call for freight rate. 
Depending on kit size and zone, average freight range is approx. $600.00 to $1000.00.