Typically, when you select a Tylo with Pure or Elite control with a Pre-Fab Outdoor Sauna, the controls are installed inside the sauna.
With either control, your pre-fab sauna will include additional trim to conceal the low voltage control cables.
Note: when installing Tylo control inside, the control must be a minimum of 12" from heater and 36" maximum above the floor.
Homecraft Revive heater with waterproof outdoor contactor box
Size: |
Outdoor Cabin |
Type: |
Outdoor Cabin-Knotty Cedar |
Bench: |
4x6 Outdoor Cabin-Knotty Cedar |
|
Mikko-OD 4 : No selection $0.00 |
|
Tylo Heaters-OD 4 : No selection $0.00 |
|
Homecraft Revive Heater-OD 5 : No selection $0.00 |
|
Controls Homecraft Revive : No selection $0.00 |
|
Accessories, Pre-Fab Saunas : No selection $0.00 |
Product Price: $8745.00
Options amount:
Select a Tab Below for More Info
Outdoor Cabin Sauna Assembly & Video (OC)
Outdoor Cabin
Outdoor Cabin Layout-4x6
Pre-Fab Heater Selection
In general, heaters with built-in controls are simpler to install in pre-fab saunas. This is because the supply wire goes directly to the heater. You do not have to route the wire to a separate control.
As a result the Saaku-NU and Tylo Sense Sport are the obvious choices.
.jpg)
Contact us to discuss or send a drawing of what you have in mind. There are many great new designer features being incorporated in saunas; inspired by online designer showcase websites. We will help you balance function vs. fashion. We will advise on how best to utilize the space. And just importantly, we will tell you if we think your design is bad or unworkable.
Please, enter a valid value
